A set of drawings for making furniture with your own hands - a kitchen.
Dimensions (width x depth x height) in mm: according to design drawings.
- Blanks - chipboard 18mm. ;
- Accessories - minifix, confirmat. ;
- Material: - chipboard18;
- Edge: - PVC;
- Specification: - PDF;
- Drawings: - PDF;
- Sketches: - PDF;
- Project file in .wdm (woody2.0) format - ViyarPro.
Project made in WOODY 2.03.41
The specifics of the project: like any kitchen - this one has specific moments - the connection of gas, water, sewerage. The kitchen project includes a table top made of nat. granite. A whole chipboard slab is laid on top of the lower modules in order to distribute the load evenly - therefore, the facades of the lower modules have a height of 20mm. above the module cover. The facades of the upper modules also have a height of 20 mm. below the bottom, which allows you to open without handles.
The project implemented a combined approach to opening doors. Opening the door without handles - bottom P2O system, top - open towards yourself: from below to the edge of the facade. This implementation allows the upper modules to close smoothly with an argument.
This project has non-standard modules: 1.1; 2.1; 3.1; 4.1; 5.1 - in these modules, the facade is higher than the module.
This project can be made on CNC equipment at Viyar - just upload the file with the .project extension to the order constructor https://viyar.ua/designers/ and place an order with the manager, while you can choose your material and edge, but be sure to take into account the specified parameters.
To make it yourself - you need to download the material from the link below, carefully study it.
Comments powered by CComment